(02) 90112078 | 
Contact us |  

Lacie 9000499AS 24TB 8big Rack Thunderbolt

Model: LAC9000499AS / Item No: 456948

Lacie 9000499AS 24TB 8big Rack Thunderbolt

More Views


24TB 8big Rack Thunderbolt


Capacity :    24TB
Internal Storage Media : 

8 x 3TB
8 or 4 hot-swappable* 7200RPM/64MB cache (or greater) hard disks
Purchase a spare hard disk | List of compatible bare hard disks

Interface :  2 x Thunderbolt™ 2 ports
Interface Transfer Rate :  20Gb/s
Performance Benchmark :  Reads | Writes (MB/s)**
12TB (4-disk) RAID 0: 800 | 900
12TB (4-disk) RAID 5: 600 | 600
24TB (8-disk) RAID 0: 1330 | 1060
24TB (8-disk) RAID 5: 1150 | 1060
48TB (8-disk) RAID 0: 1330 | 1060
48TB (8-disk) RAID 5: 1130 | 1020
Interface Technology :  Bidirectional 20Gb/s permits a high-resolution display and RAW 4K video editing
Power-Saving Mode :  Reduce power consumption by pressing the front button to spin down disks without disrupting daisy chain transfers (short press initiates power-saving mode; long press turns product off completely)
RAID Modes :  Preconfigured HFS+ RAID 5
Hardware RAID 0 / 1 / 5 / 6 / 10 / JBOD 
Configure RAID using LaCie RAID Manager software
Daisy Chain :  Connect up to six Thunderbolt-compatible devices – including Thunderbolt 2 and LaCie Thunderbolt Series products – to a computer via a single Thunderbolt cable***
Security :  AES 256-bit software encryption
Cable management arm
Cooling :  Redundant, hot-swappable fans
Aluminum front and all-metal enclosure
Efficient cooling for long-term reliability
Additional Features :  Tool-free component replacement
Cable-free fan, disk, and PSU connections
Two-step easy access to components
Front-facing status LEDs: disks, power, alarm
ID button: from front or back, user-friendly way to identify a product when many are installed in a rack
Alarm with mute button
System monitoring and email alerts for failure and warning events
Acoustic :  Idle: 50dB
Operating mode: 53dB
Operating max: 69dB^
Power Supply : 

1x 100-240V;
50/60Hz; 250W

2x 100-240V;
50/60Hz; 250W

2x 100-240V;
50/60Hz; 250W

Dimensions (WxHxD) :  477 x 44 x 772 mm | 18.9 x 1.7 x 30.4 in.
Weight :  With 8 disks: 20 kg | 44 lbs
With 4 disks: 18 kg | 39 lbs
Diskless: 15 kg | 33 lbs
System Requirements :  • Computer with a Thunderbolt 2 or Thunderbolt*** port
• Latest version of Windows® 7, Windows 8 (
see here for drivers information) / Mac OS® X 10.9 or later
• Minimum free disk space: 600MB recommended
Software :  • Intego® Backup Manager Pro
• LaCie Private-Public (protect data with AES 256-bit encryption)
• LaCie RAID Manager (administration console) 

Download product software at 
Box Content :  • LaCie 8big Rack
• Internal power supply (2x or 1x, depending on model)****
• Thunderbolt cable
• Rack mounting kit
• Hard disks (number based on model)
• Empty hard disk trays and screws (for 4-disk model only)
• Cable management arm kit
• Quick Install Guide
Comments :  * Hot swapping will result in data loss in a RAID 0 array.
** These transfer rates were achieved using AJA System Test when connected to a 13" Macbook Pro® with a 2.8GHz Intel® Core™ i7 processor and 8GB RAM. Actual data rates may vary depending on operating environment and other factors, such as RAID mode, RAID configuration, and disk capacity.
*** To achieve full interface bandwidth, connect the product to a Thunderbolt 2 port on a computer or device.
**** The 4-disk version ships with a single PSU, and is therefore not hot-swappable. Purchase an additional 
PSU Kit to ensure full redundancy.
^ These measurements have been made under normal conditions, one meter/three feet from the front of the product. This value may vary with conditions and product configuration. 

When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one thousand billion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions and will not be available for data storage.


Shipping Calculator

Skycomp Technology uses the best carriers in the business to make sure your order gets to you on time.
Australia Post eParcel 
eParcel generally takes 2-10 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office. 

Australia eParcel Express
eParcel Express generally takes 1-3 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office.

Other prefered partner
• Local Express:Delivered in 1-2 Business Days 
• Nationwide Delivery: 1-4 Business Days* 
• Nationwide Express: Next Business Day* 
*Allow extra days for regional areas 
All orders will be shipped from our Australian (NSW/QLD/VIC/WA) warehouses. More than 95% order are shipped via Australia Post E-Parcel and some from our preferred Partner listed below:

Following are the contact details of the freight companies we use:


Ph: 02-92800583 
Usually 24 hours after placing your order.

Your requirements will be our passion

For IMMEDIATE customer service assistance or help with an order please

  • Reload captcha

* Required Fields

Have you considered this?