(02) 90112078 | 
Contact us |  
COMPUTER HARDWAREPC & NOTEBOOKSSOFTWAREPRINTERS & SCANNERSSERVERSNETWORKINGELECTRONICS

Kingston KVR16R11S8/4KF 4GB 1Rx8 512M x 72-Bit PC3-12800 CL11 Registered 240-Pin

Model: KVR16R11S8/4KF / Item No: 387630
Call us for availability

Add to Cart
Add to Wishlist
OR

Kingston KVR16R11S8/4KF 4GB 1Rx8 512M x 72-Bit PC3-12800 CL11 Registered 240-Pin

More Views

Details

 

Kingston ValueRAM Server Memory

Contrary to popular belief, all server memory is not created equal. A module's reliability depends largely on steps taken to ensure quality throughout the manufacturing process. This is where ValueRAM® server memory is unique. Kingston® is investing millions in the quality of its modules today in order to reduce your total cost of ownership tomorrow. The resulting performance, stability and long-term reliability are among the reasons Kingston ValueRAM has become a worldwide industry standard. 

Kingston ValueRAM is validated on all the key server board manufacturer sites, including Intel, Supermicro, Tyan and more.

Kingston is the industry leader in PC memory. Designed with the white box user and system integrator in mind, Kingston Value RAM products are engineered to meet industry standard specifications and rigorously tested to ensure quality. Kingston Value RAM is ideal for those who purchase memory by spec and are looking for competitively priced generic memory that is 100-percent tested to meet industry specifications. Included in the package is one 4GB module of 1600MHz DDR3 memory. Specs are standard 512M X 72 ECC 1600MHz 240-Pin Registered DIMM (DDR3, 1.5V, CL11, FBGA, Gold).

Details

DESCRIPTION
This document describes ValueRAM's 512M x 72-bit (4GB)
DDR3-1600 CL11 SDRAM (Synchronous DRAM), low voltage,
registered w/parity, 1Rx8 ECC, memory module, based on nine
512M x 8-bit FBGA components. The SPD is programmed to
JEDEC standard latency DDR3-1600 timing of 11-11-11 at
1.5V. This 240-pin DIMM uses gold contact fingers. The
electrical and mechanical specifications are as follows:


FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• On-DIMM thermal sensor (Grade B)
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), double sided component

SPECIFICATIONS
CL(IDD) 11 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 35ns (min.)
Maximum Operating Power TBD W*
UL Rating 94 V - 0
Operating Temperature 0o
 C to 85o
 C
Storage Temperature -55o C to +100o
 C
*Power will vary depending on the SDRAM and
 Register/PLL used.

Details

Shipping Calculator

 
 
Skycomp Technology uses the best carriers in the business to make sure your order gets to you on time.
 
Australia Post eParcel 
eParcel generally takes 2-10 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office. 

Australia eParcel Express
eParcel Express generally takes 1-3 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office.

Other prefered partner
• Local Express:Delivered in 1-2 Business Days 
• Nationwide Delivery: 1-4 Business Days* 
• Nationwide Express: Next Business Day* 
*Allow extra days for regional areas 
 
 
All orders will be shipped from our Australian (NSW/QLD/VIC/WA) warehouses. More than 95% order are shipped via Australia Post E-Parcel and some from our preferred Partner listed below:
 

Following are the contact details of the freight companies we use:

 

IN STORE PICK UP IN SYDNEY
Ph: 02-92800583 
Usually 24 hours after placing your order.

Your requirements will be our passion

For IMMEDIATE customer service assistance or help with an order please


  • Reload captcha

* Required Fields

Have you considered this?