(02) 90112078 | 
Contact us |  
COMPUTER HARDWAREPC & NOTEBOOKSSOFTWAREPRINTERS & SCANNERSSERVERSNETWORKINGELECTRONICS

Netgear WN370 5-ports 11N WIFI WALL MOUNT ACCESS POINT

Model: WN370-10000S / Item No: 338018
Call us for availability

Add to Cart
Add to Wishlist
OR

Netgear WN370 5-ports 11N WIFI WALL MOUNT ACCESS POINT

More Views

Details

 

Small form factor and inconspicuous appearance

The aesthetically pleasing design of the WN370 allows the access point to blend nicely in the hotel room and school dormitories. WN370 provides wired access directly to the users, where the traditional form factor Access Points are normally installed on the ceiling, away from the access of the users that need wired connectivity. The WN370 is installed with easy attachment to the junction box and appears with a nice decorative appearance.

Fast installation and PoE powered

The WN370 can be installed easily and less than 5 minutes. The WN370 ships with mounting brackets and fits into both US and EU standard electric junction boxes. Only 4 screws are needed to reliably install the WN370 to the wall with low protrusion. The WN370 is powered via Power over Ethernet on the 1 Gbps uplink. Simply connect a Ethernet cable between the WN370 and a PoE enabled switch and the WN370 is up and running. There is no separate power cord needed.

Flexible and easy deployment

WN370 can be installed easily and does not need sophisticated skills of engineers. WN370s are generally deployed in room, especially effective in areas where deploying the access points in traditional locations (such as ceiling mounted or hallways of dormitories and hotels) are not feasible. Because the WN370 is designed to provide coverage in a specific room, where the RF containment is more well defined, no extensive site survey is required. Finally, because the WN370 comes with four Ethernet ports, users can plug in multiple wired devices without the requirement to pull additional cables from the access point to the wiring closet, thereby saving both time and money to meet the requirements of multiple Ethernet ports per room

Centrally managed with complete enterprise features

The WN370 is centrally managed by the WC7600 Wireless Controller. All of the configurations can be centrally configured and stored at the WC7600. Once the WN370 is discovered by the WC7600, it will receive the latest firmware and the updated configuration provided by the WC7600. The WC7600 will automatically and dynamically adjust the RF frequency and the output power of the WN370 to ensure optimal frequency reuse and the best power setting to provide ubiquitous coverage of the intended location. Comprehensive site survey is generally not needed, thereby making the installation and wireless design of WN370 as simple as it gets.

Details

Product Number
WN370
Product Thumbnail
Physical Characteristics
 
Power
  • Power over Ethernet
Physical Dimensions
  • Dimensions (L x W x H): 135.2 x 93.1 x 25.9 mm (5.46 x 3.80 x 1.16 in)
Weight
  • 0.218 kg, 0.481 lb
Mounting
  • Wall mounting to Electric Junction Box
Case
  • Support US and UN electric junction boxes
  • Designed to fit in standard US style electrical junction box of NEMA-WD6 and standard EU or china style electrical junction box of BS4662
Interfaces and Indicators
 
Physical Interfaces
  • Uplink: 1 x 10/100/1000 Mbps (PoE) + 1 10/100 voice port
  • Downlink: 4 x 10/100Mbps (data) + 1 10/100 Mbps (voice passthrough)
PoE
  • 802.3af Power over Ethernet (PoE)
LEDs
  • 3: Power, Status, WLAN
Default Reset
 
Environmental Conditions
 
Operating Temperature
  • 32° to 113° F (0° to 45° C)
Storage Temperature
  • -4° to 158° F (-20° to 70° C)
Operating Relative Humidity
  • 10% to 90%
Storage Humidity
  • 5% to 95%
MTBF
  • @ 25° C > 375,000 hours
  • @ 50° C >125,000 hours
Typical Power Consumption
  • 5.1 Watts
RF Characteristics
 
Standards
  • IEEE 802.11n 2.0 specification
  • IEEE 802.11g
  • IEEE 802.11b
Frequency Band
  • 2.4GHz
802.11n Transmit x Receive
  • 2x2
Maximum Theoretical Throughput
  • 300 Mbps
Antenna Type
  • Internal
Antenna Gain
  • 3 dbi
Maximum Transmit Power
  • 21 dBm @ 802.11b (1Mbps)
  • 21 dBm @ 802.11g (6 Mbps)
  • 21 dBm @ 802.11n (MCS0)
Minimum RX Sensitivity
  • Up to -92 dBm
Network Management
 
Deployment options - controller managed
  • Web UI
  • CLI
  • Support with WC7600
SNMP
  • SNMP v1, v2 with 802.11 standard and proprietary MIBs
Features
 
Wireless Security
  • WEP, WPA, WPA2, 802.1x
Advances Wireless Features
  • IEEE 802.1x Radius (EAP TLS, TTLS, PEAP)
  • Wireless access control to identify authorized wireless devices
  • MAC ACL
  • Rogue AP detection
  • Heat Map
  • Guest Access and Captivel Portal
  • Auto Healing
  • Auto RF adjustments
  • Auto AP power adjustments
  • VLAN
  • 802.11 WMM (Wireless Multimedia mode for QoS)
Multiple BSSID
  • up to 8
Package Contents
  • ProSAFE Wireless-N Access Point
  • Wall-mount kit
  • Installation guide
  • Warranty/support information card
Safety Certification
  • UL/cUL, CE (EN60950-1)
Countries Certification (minimum set)
  • FCC, IC, CE, EN55022/24, EN301489, EN301489-17, EN30328, EN60950,
  • C-Tick, A-Tick, SRRC
Optional Support
  • PMB0351: 5 years OnCall 24x7
  • PMB0331: 3 years OnCall 24x7
  • PMB0311: 1 year OnCall 24x7
Product Ordering Information
  • WN370-10000S

Details

Shipping Calculator

 
 
Skycomp Technology uses the best carriers in the business to make sure your order gets to you on time.
 
Australia Post eParcel 
eParcel generally takes 2-10 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office. 

Australia eParcel Express
eParcel Express generally takes 1-3 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office.

Other prefered partner
• Local Express:Delivered in 1-2 Business Days 
• Nationwide Delivery: 1-4 Business Days* 
• Nationwide Express: Next Business Day* 
*Allow extra days for regional areas 
 
 
All orders will be shipped from our Australian (NSW/QLD/VIC/WA) warehouses. More than 95% order are shipped via Australia Post E-Parcel and some from our preferred Partner listed below:
 

Following are the contact details of the freight companies we use:

 

IN STORE PICK UP IN SYDNEY
Ph: 02-92800583 
Usually 24 hours after placing your order.

Your requirements will be our passion

For IMMEDIATE customer service assistance or help with an order please


  • Reload captcha

* Required Fields

Have you considered this?