(02) 90112078 | 
Contact us |  
COMPUTER HARDWAREPC & NOTEBOOKSSOFTWAREPRINTERS & SCANNERSSERVERSNETWORKINGELECTRONICS

Apc Back UPS Rs Lcd 550 Master Control BR550GI

Model: BR550GI / Item No: 354994

Apc Back UPS Rs Lcd 550 Master Control BR550GI

More Views

Details

BR550GI Features

LCD graphics display 
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Battery replacement without tools 
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Automatic Voltage Regulation (AVR) 
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Boost and Trim Automatic Voltage Regulation (AVR) 
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Green mode 
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Disconnected battery notification 
Warns when a battery is not available to provide backup power.
Audible alarms 
Provides notification of changing utility power and UPS power conditions
Automatic self-test 
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery-protected and surge-only outlets 
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Cold-start capable 
Provides temporary battery power when the utility power is out.
Dataline surge protection 
Provides protection of connected equipment from power surges on the data lines.
Hot-swappable batteries 
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Battery failure notification 
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Safety-agency approved 
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
USB connectivity 
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries 
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Power-saving outlets 
Automatically cuts power to idle equipment to conserve electricity.
Boost and Trim Automatic Voltage Regulation (AVR) 
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

 

 

Back-UPS Pro Features & Benefits

Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Availability
Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Cold-start capable
Provides temporary battery power when the utility power is out.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Serviceability
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
Manageability
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Details

Output

Output Power Capacity
330 Watts / 550 VA
Max Configurable Power
330 Watts / 550 VA
Nominal Output Voltage
230V
Output Frequency (sync to mains)
50 Hz
Topology
Line Interactive
Waveform Type
Stepped approximation to a sinewave
Output Connections
(3) IEC 320 C13 (Battery Backup) IEC 320 C13
(3) IEC 320 C13 (Surge Protection) IEC 320 C13
(2) IEC Jumpers (Battery Backup)  

Input

Nominal Input Voltage
230V
Input Frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
IEC-320 C14  
Input voltage range for main operations
176 - 282V
Input voltage adjustable range for mains operation
155 - 290V
Maximum Input Current
6A
Input Breaker Capacity
7  A

Batteries & Runtime

Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
12 hour(s)
Replacement Battery
RBC™ Quantity
1
Runtime Graph
 

Energy Use/Efficiency

Load Efficiency
25% 93.2%
50% 96.5%
75% 97.6%
100% 98.2%

Communications & Management

Interface Port(s)
Optional Simple Signalling RS232 cable, USB
Control panel
Multi-function LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating
420 Joules
Filtering
Full time multi-pole noise filtering :10% of IEEE surge let-thgouh : zero clamping response time: instantaneous
Data Line Protection
Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)

Physical

Maximum Height
190.00 mm
Maximum Width
91.00 mm
Maximum Depth
310.00 mm
Net Weight
6.53 KG
Shipping Weight
7.71 KG
Shipping Height
252.00 mm
Shipping Width
138.00 mm
Shipping Depth
442.00 mm
Master Carton Units
2.00
Master Carton Weight
15.94 KG
Color
Black
SCC Codes
1073130426688 1
Units per Pallet
48.00

Environmental

Operating Environment
0 - 40 °C
Operating Relative Humidity
0 - 95%
Operating Elevation
0-3000 meters
Storage Temperature
-15 - 45 °C
Storage Relative Humidity
0 - 95%
Storage Elevation
0-15000 meters
Audible noise at 1 meter from surface of unit
45.00 dBA

Conformance

Regulatory Approvals
A-tick, C-tick, CE, GOST, GS Mark
Standard Warranty
2 years repair or replace, 3 years repair or replace for European Union countries

Sustainable Offer Status

RoHS
Compliant
REACH
REACH: Contains No SVHCs

Details

Shipping Calculator

 
 
Skycomp Technology uses the best carriers in the business to make sure your order gets to you on time.
 
Australia Post eParcel 
eParcel generally takes 2-10 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office. 

Australia eParcel Express
eParcel Express generally takes 1-3 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office.

Other prefered partner
• Local Express:Delivered in 1-2 Business Days 
• Nationwide Delivery: 1-4 Business Days* 
• Nationwide Express: Next Business Day* 
*Allow extra days for regional areas 
 
 
All orders will be shipped from our Australian (NSW/QLD/VIC/WA) warehouses. More than 95% order are shipped via Australia Post E-Parcel and some from our preferred Partner listed below:
 

Following are the contact details of the freight companies we use:

 

IN STORE PICK UP IN SYDNEY
Ph: 02-92800583 
Usually 24 hours after placing your order.

Your requirements will be our passion

For IMMEDIATE customer service assistance or help with an order please


  • Reload captcha

* Required Fields

Have you considered this?