(02) 90112078 | 
Contact us |  
COMPUTER HARDWAREPC & NOTEBOOKSSOFTWAREPRINTERS & SCANNERSSERVERSNETWORKINGELECTRONICS

Icy Box Ib-3680Su3 External 8 Bay Jbod Case For 8 X 3.5"

Model: HDDICY3680SU3 / Item No: 431353

Icy Box Ib-3680Su3 External 8 Bay Jbod Case For 8 X 3.5"

More Views

Details

IB-3680SU3

External 8 Bay JBOD Case for eight 3.5 inch SATA l/ll/lll HDDs

  • Silent operation by thermal controlled fan
  • Energy saving by supporting sleep modus
  • Easy assembling by trayless design
  • HDD capacity unlimited
  • External data interface: USB 3.0, eSATA
  • Plug & Play and Hot Swap
  • Windows 7/8.x, MAC OS X > 10.5
  • JBOD (Single)

The external JBOD enclosure can accommodate a total of eight SATA I / II / III hard drives or SSDs. It consists largely of aluminium and is therefore stable and dissipates heat very well. The cooling of the drives is achieved due to two temperature controlled 80mm fan on the back and corresponding air-inlets support below the drive bays on the front. The door of the enclosure can be locked.

The display of the JBOD system informs through various LEDs about operation, fan, interfaces and disk usage. As a huge JBOD data storage system can provide its full function. Except the existing external interfaces USB 3.0 and eSATA the ability to use hard drives without any capacity constraints play? a big role as well as .

Among the capabilities of the JBOD enclosure are various other convenient functions. Such as, for example, the strapless hard disk installation and energy-saving standby mode. As well as hot-swap capability, plug & play and support for both Windows and MAC systems.

For users with larger demands the ICY BOX IB-RD3680SU3 enclosure provides support of RAID Level 0 (striping) / 10/5/50 / BIG (Spanning).

 

Details

Specifications:

  • Material: Aluminium / Plastic
  • HDD size (inch): 8 x 3.5 inch
  • HDD size (cm): 3.5 inch ?
  • HDD interface: SATA I/II/III
  • HDD capacity: Unlimited
  • Hot Swap: Yes
  • Plug & Play: Yes
  • External data interface: USB 3.0 / eSATA
  • Operating system: Windows 7/8, MAC OS X
  • Transfer rate:?USB 3.0 up to 5 Gbit/s, eSATA up to 3.0 Gbit/s
  • Power switch: Yes
  • Lock: Yes
  • LED: Power, fan, interface, HDD in use, access and error (RAID)
  • Power connector: Internal power supply, Input: AC 100 - 240 V, 2 A Output: 5 Vsb/3 A, 12 V/6 A, 12 V/6 A
  • Packing content: 1x device, 1x power supply cable, 1x USB 3.0 cable, 1x eSATA cable, 8x handles, 1x set of screws, 1x quick installation guide
  • Gross weight (incl. packing): 5.7 kg
  • Net weight: 5 kg
  • Dimension of packing box: 98x234x240 mm
  • Dimension of article: 253x155x352 mm

Details

Shipping Calculator

 
 
Skycomp Technology uses the best carriers in the business to make sure your order gets to you on time.
 
Australia Post eParcel 
eParcel generally takes 2-10 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office. 

Australia eParcel Express
eParcel Express generally takes 1-3 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office.

Other prefered partner
• Local Express:Delivered in 1-2 Business Days 
• Nationwide Delivery: 1-4 Business Days* 
• Nationwide Express: Next Business Day* 
*Allow extra days for regional areas 
 
 
All orders will be shipped from our Australian (NSW/QLD/VIC/WA) warehouses. More than 95% order are shipped via Australia Post E-Parcel and some from our preferred Partner listed below:
 

Following are the contact details of the freight companies we use:

 

IN STORE PICK UP IN SYDNEY
Ph: 02-92800583 
Usually 24 hours after placing your order.

Details

Your requirements will be our passion

For IMMEDIATE customer service assistance or help with an order please


  • Reload captcha

* Required Fields

Have you considered this?