Adapter Architecture
ARC-1210 uses IntelR IOP332 I/O processor. ARC-1220/1230/1260 uses IntelR IOP333 I/O processor
PCI-Express X8 bus
256MB on-board DDR333 SDRAM with ECC protection(4/8-port)
One SODIMM socket with default 256MB of DDR333 SDRAM with ECC protection, Upgrade to 1GB. An ECC or non-ECC SDRAM module using X8 or X16 chip organization (12/16/24-port)
Write-through or write-back cache support
Support up to 4/8/12/16 SATA II drives
Multi-adapter support for large storage requirements
BIOS boot support for greater fault tolerance
BIOS PnP (plug and play) and BBS (BIOS boot specification) support
Intel RAID 6 Engine to support extreme performance RAID 6
NVRAM for RAID event & transaction log
Redundant flash image for adapter availability
Battery Backup Module (BBM) ready
ARC-6120BA-T1xx, xx means version no.
RoHS Compliant
RAID Features
RAID level 0, 1, 10(1E), 3, 5, 6 (if RAID 6 engine supported) and JBOD
Multiple RAID selection
Array roaming
Online RAID level/stripe size migration
Online RAID capacity expansion and RAID level migration simultaneously
Instant availability and background initialization
Automatic drive insertion/removal detection and rebuild
Greater than 2TB per volume set
Support S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
Support spin down drivers when not in use to extend service life (MAID)
Monitors/Indicators
System status indication through HDD activity/fault connector, LCD Connector and alarm buzzer
SMTP support email notification
SNMP support for remote notification
I2C Enclosure management ready
RAID Management
Field-upgradeable firmware in flash ROM
In-Band Manager
Hot key boot-up McBIOS RAID manager via BIOS
Support controller's API library for customer to write its own AP
Support Command Line Interface (CLI)
Browser-based management utility via ArcHttp Proxy Server
Single Admin Portal (SAP) monitor utility
Disk Stress Test (DST) utility for production in Windows
Out-of-Band Manager
Firmware-embedded Browser-based RAID manager, SMTP manager, SNMP agent, and Telnet function via Ethernet port (for 12/16 port Adapter)
Support controller's API library for customer to write its own AP (for 12/16 port Adapter)
Push Button and LCD display panel
Software Drivers
Windows 2000/XP (Scsiport Driver)/Vista
Windows Server 2003/2008 (Scsiport Driver and Storport Driver)
Redhat Linux and SuSE Linux
FreeBSD
Solaris 10x86
UnixWare 7.1.x
Netware 6.5
Mac OS 10.4.x/10.5.x (EFI BIOS support)
Environmental/Physical
Mechanical
Dimension:
ARC-1210/1220: 64(H) x 168(L) mm
ARC-1230 /1260: 98.4(H) x 214(L) mm
SATA Interface:
ARC-1210/1220/1230/1260(Multi-layer SATA connector)
Environmental Specifications
Operating:
Temperature:+5°c to +50°c
Humidity: 15-80%
non-condensing
Storage Temperature:
Temperature:-40°c to 70°c
Humidity: 5-90%
non-condensing
Electrical
Power Requirements:
4.95W
6.22W
Note:
The stick (part number: xx-/1230D1/1260D1-xxxx) on the card, means 256MB ECC memory is included (ready to boot), if shows xx-/1230/1260-xxxx, that means memory not included. You must make a separate purchase of memory and insert into adapter, before operating adapter)
* Product descriptions and part numbers are subject to change, and may not reflect
manufacturer product changes. Please check the manufacturer's website and use the
item's manufacturer part number to find the most up to date product description.