ENERGY SAVING - ESAT SERIES II (ALTO)
Energy Saving Technology 1000VA
- Pure sine wave
Output on Battery
- Intelligent Charging controlled
- 98% Efficiency in ECO Mode
- Range 1.0KVA - 7.5KVA
- Intelligent interactive LCD control panel
- Multiple interfaces options: RS232/RS485/MODBUS/USB/SNMP
- Compact design
Standard and long backup time
- Cold start
Starts on battery, no mains power required
- Protection against overload, overheating, surges, spikes, short circuit, over charging
- Ability to Integrate with Genset
- Easy battery replacement
Due to rising electricity costs, Energy Saving has become one of today's most important issues. It is a trend to operate ECO - Economical mode on big capacity on-line double conversion UPS. This seems to virtually turn UPS back to Stand by (0ff-line) era.
Our new ES pure sine wave line-interactive UPS are based on Energy Saving technology. In addition to providing high quality Sine Wave power and low Harmonic Distortion to support both Linear and Non-linear loads the ES series has a built in wide range AVR (automatic voltage regulator) on Bypass circuit which stabilises power and makes the ES series operate even more effectively and safely than an On-line double conversion UPS operated under ECO mode.
ES pure sine wave line-interactive UPS vs On-line double conversion UPS operated under ECO mode
- Wider input range: More than 10% wider input main power voltage range than an on-line UPS.
- High overall efficiency: Consumes much less power than an on-line double conversion UPS during bypass mode operation.
- Better stability: Concise designed compact unit gives better stability.
- Economically smaller: Smaller footprint. Less expense for users.
|Line Interactive Sine wave output||Tower UPS|
|Model||Energy Saver Series (ES xxx)||ESAT-1000||ESAT-1500||ESAT-2000|
|Nominal Voltage||230 VAC|
|Wave Form||Pure Sine Wave|
|Voltage Range||170 VAC ~ 300 VAC|
|Frequency||45Hz - 70Hz auto sensing|
|Output - AVR Settings||Boost Transfer||208VAC ± 2%|
|Boost Return||218VAC ± 2%|
|Buck Transfer||252VAC ± 2%|
|Buck Return||242VAC ± 2%|
|Low Voltage Transfer to Battery||190VAC ± 2%|
|Low Voltage Return||200VAC ± 2%|
|High Voltage Transfer to Battery||286VAC ± 2%|
|High Voltage Return||276VAC ± 2%|
|Overload Protection||Line Mode||>110% then buzzer alarm and amber LED continuously blinking|
|Battery Mode||110% ~ 150% for 30 seconds: >150% for 200ms, then UPS Shuts Down|
|Short Circuit Protection||Line Mode||Circuit Breaker|
|Battery Mode||Electronic Circuit|
|Cold Start||DC Start||Yes|
|Battery Voltages||24 VDC||36 VDC||36 VDC|
|Battery Amp||7.2 Ah||7.2 Ah||9 Ah|
|LCD Display||UPS status; I/P & O/P Voltage frequency; Load Level;|
|Battery voltage & Level internal temperature Normal Green|
|Audible alarm||Battery Mode||Beeping every 4 seconds|
|Low Battery||Beeping every 1 second|
|UPS Fault||Continuous Beep|
|Overload||Beeping 2 x every second|
|Communications Interface||RS232; SNMP; USB; Dry Contact & AS 400 Options.|
|Dimensions||W x H x D in mm)||145/210/380||145/210/445||145/210/445|
|Environment||Operating Environment||0 - 40 Deg Relative Humidity 0 - 95% Non Condensing|
|Noise Level||Less than 55dBA (@1.0 Meter)|
|Outlets / Connections||3 IEC||3 IEC||6 IEC|
eParcel generally takes 2-10 business days to be delivered depending on final destination.
eParcel Express generally takes 1-3 business days to be delivered depending on final destination.
Other prefered partner
• Local Express:Delivered in 1-2 Business Days
• Nationwide Delivery: 1-4 Business Days*
• Nationwide Express: Next Business Day*
*Allow extra days for regional areas
Following are the contact details of the freight companies we use:
- Australia Post - eParcel
Ph: 13 62 45
- Couriers Please (NSW)
Ph: 1300 PLEASE
- Fastway Couriers (NSW)
Ph: (02) 9737 8288
- Star Track Express
Ph: 13 23 45
- AIR ROAD Express
Ph: 1300 237 824
- Allied Express
Ph: 13 15 21
- Australian Air Express
Ph: 13 12 13
- Toll Ipec
Ph: 1300 865 547
IN STORE PICK UP IN SYDNEY
Usually 24 hours after placing your order.
Have you considered this?