Startech S322m225r Dual-slot M.2 To Sata Adapter - Raid
Customer Also Bought
Customer Also Viewed
Boost your system performance by enhancing the capacity, speed and security of your data storage. This two-drive M.2 to SATA adapter lets you install two M.2 SATA drives instead of a SATA platter drive, in a single 2.5” drive bay, and increase your storage options by configuring a powerful RAID array.
Build a RAID array to enhance system performance
The dual M.2 to SATA adapter supports multiple RAID modes, including RAID 0, 1, or spanning, helping you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode. The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independently of one another.
Maximize file transfer speeds
The M.2 SATA SSD adapter lets you utilize the full potential of your SATA III controller. Using M.2 SATA SSDs in place of a platter drive reduces your data transfer bottlenecks, giving you file transfer speeds of up to 6Gbps.
The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of your M.2 NGFF SSDs.
This open-frame adapter is easy to install as it comes with all the necessary installation hardware and doesn’t require any extra software or drivers, to get you up and running quickly.
The S322M225R is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Take advantage of the speed of M.2 drives in any 2.5” SATA application
Add data redundancy to your system or increase the storage capacity of your system through RAID
Retrieve or back up data from M.2 (NGFF) drives using a standard SATA interface
Access M.2 (NGFF) drives from an external source, such as a SATA drive enclosure or docking station
|Chipset ID||ASMedia - ASM1092R|
|Compatible Drive Types||M.2 SATA (NGFF, B-Key)|
|Number of Drives||2|
|Supported Drive Height(s)||2230|
|General Specifications||Not compatible with M.2 NVMe or AHCI PCI-Express SSDs In order to see multiple drives in JBOD mode, your computer’s SATA controller must also support Port Multiplier.|
|Hot Swap Capability||No|
|Maximum Data Transfer Rate||6 Gbps|
|Supported RAID Modes||RAID 0 (Striped Disks)|
|RAID 1 (Mirrored Disks)|
|JBOD - (just a Bunch of Disks)|
|BIG (Spanning or Concatenation)|
|Type and Rate||SATA III (6 Gbps)|
|Drive Connectors||2 - M.2 SATA (NGFF, B-Key) Receptacle|
|Host Connectors||1 - SATA Data & Power COmbo (7+15 pin) receptacle|
|OS Compatibility||OS independent; No software or drivers required|
|Humidity||15% to 90%|
|Operating Temperature||+5°C to +50°C (41°F to 122°F)|
|Storage Temperature||-25°C to +70°C (-13°F to 158°F)|
|Product Height||0.3 in [7 mm]|
|Product Length||3.9 in [100 mm]|
|Product Width||2.8 in [70 mm]|
|Product Weight||1.4 oz [41g]|
|Shipping (Package) Weight||3.9 oz [110 g]|
|What's in the Box|
|Included in Package||1 - dual M.2 drive to SATA host adapter|
|2 - sets of drive-mounting hardware|
|4 - adapter-mounting screws|
|1 - quick start guide|
*Product appearance and specifications are subject to change without notice.
- Manufacturer Warranty
- 2 Years Limited Warranty
- Manufacturer Contact Info