(02) 90112078 | 
Contact us |  
COMPUTER HARDWAREPC & NOTEBOOKSSOFTWAREPRINTERS & SCANNERSSERVERSNETWORKINGELECTRONICS

EATON 5PX 1500VA/1350W 2U Rack/Tower UPS 5PX1500iRT

Model: PW86305 / Item No: 249041

EATON 5PX 1500VA/1350W 2U Rack/Tower UPS 5PX1500iRT

More Views

Details

General
Topology Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
Configuration Tower/Rack 2U
Rating (VA/Watts) 1500/1350
Dimensions (H x W x D, mm) 86.2 x 441 x 522
Weight (kg) 27.6
Warranty 3 years on electronics, 2 years on batteries
 
Electrical Input
Connection
(1) IEC-320-C14
C14
Input Voltage Without Using Batteries 160V-294V (adjustable to 150V-294V)
Input frequency Range Without Using Batteries 47 to 70 Hz (50 Hz system), 56.5 to 70 Hz (60 Hz system), 40 Hz in low-sensitivity mode
 
Electrical Output
Voltages 230 V (+6/-10 %) (Adjustable to 200V / 208V / 220V / 230V / 240V)
Output Receptacles
(8) IEC-320-C13
C13
Remotely controlled sockets 2 groups of 2 x IEC C13 (10 A)
Output Frequency 50/60 Hz +/- 0.1 % (autosensing)
 
Battery
Runtime
(Minutes)
200
400
600
800
1000
1200
0
100
200
300
400
500
600
700
800
900
1000
 
  Standard Runtime
  With 1 EBM
  With 2 EBMs
  With 3 EBMs
  With 4 EBMs
Load (Watts)
Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.

Show:

  
  
  
  

Load (Watts): 348
Standard Runtime: 24
 With 1 EBM: 127
 With 2 EBMs: 227
 With 3 EBMs: 325
 With 4 EBMs: 423
 
Battery Management ABM® & Temperature compensated charging method (user selectable), Automatic battery test, deep discharge protection, automatic recognition of external battery units
 
Communications
Communication Ports 1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously)
+ 1 mini terminal block for remote ON/OFF and Remote Power Off
Communications Card Slots 1 slot for NMC Minislot card or NMC ModBus/JBus or MC Contacts/Serial
 
Environmental & Standards
Audible Noise < 45 dBA
Operating Temperature 0 to 40°C
Performance - Safety - EMC IEC/EN 62040-1-1 (Safety), IEC/EN 62040-2 (EMC), IEC/EN 62040-3 (Performance), C-Tick
Approvals CE, CB report, TÜV

Details

Shipping Calculator

 
 
Skycomp Technology uses the best carriers in the business to make sure your order gets to you on time.
 
Australia Post eParcel 
eParcel generally takes 2-10 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office. 

Australia eParcel Express
eParcel Express generally takes 1-3 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office.

Other prefered partner
• Local Express:Delivered in 1-2 Business Days 
• Nationwide Delivery: 1-4 Business Days* 
• Nationwide Express: Next Business Day* 
*Allow extra days for regional areas 
 
 
All orders will be shipped from our Australian (NSW/QLD/VIC/WA) warehouses. More than 95% order are shipped via Australia Post E-Parcel and some from our preferred Partner listed below:
 

Following are the contact details of the freight companies we use:

 

IN STORE PICK UP IN SYDNEY
Ph: 02-92800583 
Usually 24 hours after placing your order.

Your requirements will be our passion

For IMMEDIATE customer service assistance or help with an order please


  • Reload captcha

* Required Fields

Have you considered this?