(02) 90112078 | 
Contact us |  
COMPUTER HARDWAREPC & NOTEBOOKSSOFTWAREPRINTERS & SCANNERSSERVERSNETWORKINGELECTRONICS

Sunix Multi I/O Low Profile PCI Card - 2 RS-232 Serial and 1 Parallel Port

Model: MULTIO-3PL / Item No: 230390
Call us for availability

Add to Cart
Add to Wishlist
OR

Sunix Multi I/O Low Profile PCI Card - 2 RS-232 Serial and 1 Parallel Port

More Views

Details

The majority of today´s motherboards are not equipped with any serial (RS-232) or parallel (LPT) ports. With SUNIX MULTIO-3PL multi I/O board, anyone can add two RS-232 and one IEEE1284 parallel port to their system, allowing them to use both serial and parallel devices. SUNIX MULTIO-3PL is compatible with both 32/64-bit PCI architecture supporting 3.3 and 5V bus, allowing the board to be installed in any slim size PC-based system via the included low profile bracket. Furthermore, SUNIX MULTIO-3PL multi-IO card supports all major OS on the market. We provide driver support for Microsoft Windows 32/64-bit platforms and Linux, making it the best and most economical solution for commercial and industrial applications. * Adds two RS-232 com ports and one IEEE1284 LPT port to your system. * Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key. * High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board. * Add two RS-232 serial ports with communication speeds up to 115.2Kbps. * On-chip hardware auto flow control to guarantee no data loss. * Built-in ±2KV ESD protection for all serial signals. * Supports IEEE 1284-1994 parallel port standard ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port) SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port) * Auto-switching between ECP/EPP/SPP/BPP modes without configuration. * Plug-n-Play, I/O address and IRQ assigned by system. * Low profile bracket design is ideal for slim or portable PCs. * Certified by CE, FCC, RoHS, and has Microsoft WHQL approval. * Supports Microsoft Windows, Linux, and DOS. General 2-port RS-232 & 1-port Parallel Universal PCI Low Profile Multi-I/O Board Interface RS-232 and IEEE1284 Controller SUNIX SUN1989 (16C950 UART Compatible) Bus Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1 IRQ & IO Assigned by System Serial Communication Interface RS-232 No. of Port 2 ports FIFO 128 byte (Hardware) Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI Baud rate 50 bps to 115.2 Kbps Data bit 5,6,7,8 Stop bit 1,1.5,2 Parity None, Even, Odd, Space, Mark Flow Control None, Xon/Xoff, RTS/CTS Protection ±2KV ESD protection for each signal Human Body Model (HBM) PCB connector DB44 Female Cable Connector DB9 Male

Details

Shipping Calculator

 
 
Skycomp Technology uses the best carriers in the business to make sure your order gets to you on time.
 
Australia Post eParcel 
eParcel generally takes 2-10 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office. 

Australia eParcel Express
eParcel Express generally takes 1-3 business days to be delivered depending on final destination.
We recommend you use this service for PO Box or if you believe your delivery address will be unattended as you will be able to collect this from your local Post Office.

Other prefered partner
• Local Express:Delivered in 1-2 Business Days 
• Nationwide Delivery: 1-4 Business Days* 
• Nationwide Express: Next Business Day* 
*Allow extra days for regional areas 
 
 
All orders will be shipped from our Australian (NSW/QLD/VIC/WA) warehouses. More than 95% order are shipped via Australia Post E-Parcel and some from our preferred Partner listed below:
 

Following are the contact details of the freight companies we use:

 

IN STORE PICK UP IN SYDNEY
Ph: 02-92800583 
Usually 24 hours after placing your order.

Details

See manufacturer website for warranty terms.
Sunix - http://www.mgeups.com/

Your requirements will be our passion

For IMMEDIATE customer service assistance or help with an order please


  • Reload captcha

* Required Fields

Have you considered this?