Reviews powered by TestFreaks
Score out of 5
Click to read !

8ware ADSL 2+ Splitter / Filter for AU (AS/ACIF S041:2005 Compliant)

/ ITEM NO: 277042

Stock Level:



In stock at supplier
In stock at partnered supplier in Australia

Click & Collect

In stock at supplier
In stock at partnered supplier in Australia
Retail Price $15
Save $5
no surcharge fee
Shipping Calculator:
Description: The ADSL filter/splitter has been specifically designed to implement the functionality of a low pass filter in POTS over ADSL application.  Asymmetric Digital Subscriber Line (ADSL) technology is a dedicated, point to point public network access technology that allow multiple forms of data, voice and video to be carried over twisted-pair copper wire on the local loop between a network service provider's (NSP'S) telephone exchange and the customer site or on local loops created either intra-building or intra-campus. ADSL delivers this high-speed performance over existing copper telephone line while simultaneously allowing a traditional analog service to coexist without interruption via a series of low-pass filters. The low-pass filter on the customer's premises is mounted inside a stand-alone ABS housing. The ADSL filter/splitter integrates a low pass filter which blocks the ADSL high frequency signals from reaching the analog device and provides isolation from any impedance effects of the analog device on the ADSL transmission. The filter also attenuates any wideband impulse noise generated by the analog device due to the interruption of loop current (e.g. pulse-dialing or on hook / off hook conditions). An unfiltered RJ11 socket is provided for connection of the ADSL modem. Because our product connects directly to the subscriber's loop media, it must also provide some surge protection from externally induced voltage which could damage any attached equipment or endanger humans interacting with the installed equipment. Additional surge protection measures are built into the product to protect against line surges that could damage the filter itself.INSTALLATION : Unplug the device's cord from the wall socket. If you have a modular RJ11/RJ45 telephone wall socket, use the short modular line cord supplied with the ADSL filter/splitter to connect the LINE socket on the filter/splitter to the RJ11/RJ45 telephone socket on the wall. If you have the older -610 Telstra Socket- on the wall, a 606M adaptor will be required to convert the Telstra socket to an RJ11 socket. Plug the phone cord (or other device cord) into the PHONE socket on the ADSL filter/splitter. Plug the LINE cord from the ADSL Modem/Router into the MODEM socket on the filter/splitter. To connect the ADSL Modem/Router to your PC or network, refer to instructions supplied with the ADSL Modem/Router or seek advice from your ADSL service provider.
See manufacturer website for warranty terms.

Our customer service staff are standing by to assist you. Should you have questions about this product, please complete the form below and we'll be in touch soonest possible. We aim to answer your enquiries within 24 hours.

For IMMEDIATE customer service assistance or help with an order please call our Customer Service Team on: 02 9011 2078
Please type the letters below