NO SURCHARGE ON ALL CREDIT CARD PAYMENTS details // SCAM ALERTS

X
Australia's Leading Online Computer Store
Your Cart

Buy Kingston HyperX FURY 8GB (2x 4GB) DDR4 2666MHz Memory Black

Kingston HyperX FURY 8GB (2x 4GB) DDR4 2666MHz Memory Black

Delivery

In Stock
Usually ships within 24 hours*
no surcharge fee
Paypal/MasterCard/Visa/Amex
Retail Price $169
$67
Save $102
8gb 2666mhz Ddr4 Non-ecc Cl15 Dimm (kit Of 2)hyperx Fury Black Series Description HyperX HX426C15FBK2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 8GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V. Features Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP - 2.5V Typical VDDSPD = 2.2V to 3.6V Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals Low-power auto self refresh (LPASR) Data bus inversion (DBI) for data bus On-die VREFDQ generation and calibration Single-rank On-board I2 serial presence-detect (SPD) EEPROM 16 internal banks; 4 groups of 4 banks each Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) Selectable BC4 or BL8 on-the-fly (OTF) Fly-by topology Terminated control command and address bus Height 1.340” (34.04mm), w/heatsink
67 67 AUD 100
SKU
HX426C15FBK2/8
SKU#: HX426C15FBK2/8 / ITEM NO: 654105 / BRAND: Kingston
Rating:
$67.00
Shipping Calculator:
Loading...
8GB 2666MHz DDR4 Non-ECC CL15 DIMM (Kit of 2)HyperX FURY Black Series

Picture shown is for illustration purpose only
Please refer to Manufacturer SKU for the exact details

8gb 2666mhz Ddr4 Non-ecc Cl15 Dimm (kit Of 2)hyperx Fury Black Series

Description

HyperX HX426C15FBK2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 8GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V.

Features

  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP - 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • Height 1.340” (34.04mm), w/heatsink

Brand Kingston
Capacity 8GB (2x 4GB)
Series HyperX Fury
Memory Type DDR4
Features Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
Height 1.340” (34.04mm), w/heatsink
Speed 2666 MHz
Voltage 1.2V
Warranty Limited Lifetime
Latency CL15-17-17
Manufacturer Warranty
Limited Product Lifetime Warranty
Manufacturer Contact Info
http://www.kingston.com/en/
1800 620 569

Our customer service staff are standing by to assist you. Should you have questions about this product, please complete the form below and we'll be in touch soonest possible. We aim to answer your enquiries within 24 hours.

For IMMEDIATE customer service assistance or help with an order please call our Customer Service Team on: 02 9011 2078
Please type the letters below